BBG-165RT BROADBAND SERIES SPECIFICATIONS

·         Flame-arresting one-way pressure-relief vent for safety and long life.

·         Case and cover of high-impact polypropylene with reinforced endwalls to reduce bulging.

·         Thermally welded case-to-cover bond to ensure a leak-proof seal.

·         Complies with UN 2794

·         Thick positive plate design for maximum service life.

·         UL-recognized component.

·         Multicell design for ease of installation and maintenance.

·         Designed to meet full published ratings at initial start-up installation.

·         Not restricted for surface transport – Classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189.

·         Gelled electrolyte for superior float service life and thermal mangement.

·         Gas recombination efficiency of up to 99% for freedom from electrolyte maintenance.

·         Can be used in any orientation. Upright, side or end mounting recommended.

Cells Per Unit

Voltage Per Unit

Weight

Electrolyte

Maximum Discharge Current

Short Circuit Current

Ohms Imped. 60 Hz (W)

Dimensions Overall (Inches)

     6

12.84

63.0 lbs.

29.0 kg. 

Gelled H2SO4

SG = 1.300

800 Amps

2300 Amps @ 0.1 sec.

0.0055 Ohms

Length = 12.51 Width   = 6.83  Height  = 9.05

Capacity

86.7 Ah @ 20 hr. rate to 1.75 volts per cell @ 77°F (25°C)                      

Operating Temperature Range

Discharge; -40°F (-40°C)  to +160°F (71°C), Charge; -10°F (-23°C) to +140°F (60°C) (with temperature compensation)

Nominal Operating Temperature Range

+74°F (23°C) to +80°F (27°C)

Float Charging Voltage

13.5 to 13.8 VDC / unit Average @ 77°F (25°C)

Recommended Maximum Charging Current Limit

C/5 amperes (17.2 amperes @ 100% depth of discharge) @ 20 hour rate

Maximum AC Ripple (Charger)

0.5% RMS or 1.5% P-P of float charge voltage recommended for best  results. 

Maximum voltage allowed = 1.4% RMS (4% P–P)

Maximum current allowed = 4.3 amperes RMS (C/20)

Self Discharge

Dynasty Broadband batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required.  For higher temperatures the time interval will be shorter.

Accessories

Inter unit connectors, racks and cabinet systems are available.

Terminal

Flag terminal with 0.28” clearance hole to accept 0.25” ( 6mm ).

Terminal Hardware Initial Torque

65 in.-lbs. (7.4 N-m).

Terminal Hardware Annual Retorque

52 in. – lbs. (5.8 N–m).

Discharge in Hours

0.25

0.50

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

10.0

12.0

20.0

24.0

48.0

72.0

100

Amp-Hr Capacity

33.9

45.5

55.9

65.6

70.5

73.6

75.9

77.6

79.0

80.2

82.0

83.3

86.0

87.7

91.0

92.5

93.6

Amperes

5

10

15

20

25

30

35

40

45

50

Run Time (min)

1022

480

305

218

165

134

111

93

80

70

End Point Volts/Cell

0.25

0.50

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

10.0

12.0

20.0

24.0

48.0

72.0

100.0

1.75

135.6

91.0

55.9

32.8

23.5

18.4

15.2

12.9

11.3

10.0

8.20

6.90

4.30

3.70

1.90

1.29

0.94

1.80

126.3

87.5

54.6

32.2

23.1

18.1

14.9

12.7

11.1

9.90

8.10

6.80

4.30

3.60

1.87

1.27

0.92

1.85

112.7

80.0

51.1

30.7

22.1

17.4

14.4

12.3

10.7

9.50

7.80

6.60

4.10

3.50

1.81

1.23

0.90

1.90

96.0

68.8

44.7

27.5

20.1

16.0

13.3

11.3

9.90

8.80

7.30

6.20

3.90

3.30

1.68

1.14

0.83