UPS12-475 HIGH RATE SERIES SPECIFICATIONS

·         Flame-arresting one-way pressure-relief vent for safety and long life.

·         Thermally welded case-to-cover bond to eliminate leakage.

·         Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance.

·         Computer-generated grid design optimized for high power density.

·         UL-recognized component.

·         Multicell design for economy of installation and maintenance. 

·         Can be mounted in any orientation.  Upright, side or end mounting recommended.

·         Not restricted for air transport  - Complies with IATA/ICAO Special Provision A67.

·         Not restricted for surface transport – Classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189.

·         Computer designed lead, low calcium alloy grid for minimal gassing and ease of recycling.

·         Case and cover available in both standard and flame retardant polypropylene.

·         Flame retardant polypropylene case and cover compliant with UL 1778 (optional).

Cells Per Unit

Voltage Per Unit

Weight

Electrolyte    

Maximum Discharge Current

Short Circuit Current

Ohms Imped. 60 Hz (W)

Dimensions Overall (Inches)

     6

12.84

100 lbs.

45 kg. 

Absorbed H2SO4

SG = 1.300

800 Amps

5000 Amps @ 0.1 sec.

0.0023 Ohms

Length = 13.57

Width   =   6.76

Height  = 10.93

Capacity

475 watts per cell at the 15 minute rate to 1.67 volts per cell @ 77ºF (25ºC).

134 Ah @ 20 hr. rate to 1.75 volts per cell @ 77°F (25°C)                      

122 Ah @ 10 hr. rate to 1.80 volts per cell @ 20°C (68°F)

Operating Temperature Range

Discharge; -40°F (-40°C)  to +160°F (71°C), Charge; -10°F (-23°C) to +140°F (60°C) (with temperature compensation)

Nominal Operating Temperature Range

+74°F (23°C) to +80°F (27°C)

Float Charging Voltage

13.5 to 13.8 VDC / unit Average @ 77°F (25°C)

Recommended Maximum Charging Current Limit

C/5 amperes (27 amperes @ 100% depth of discharge)

Equalization and Cycle Service Charging Voltage

14.4 to 14.8 VDC/unit Average at 77ºF (25ºC).

Maximum AC Ripple (Charger)

0.5% RMS or 1.5% P-P of float charge voltage recommended for best  results. 

Maximum voltage allowed = 1.4% RMS (4% P–P)

Maximum current allowed = 6.7 amperes RMS (C/20)

Self Discharge

Dynasty UPS batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required.  For higher temperatures the time interval will be shorter.

Accessories

Inter unit connectors, racks and cabinet systems are available.

Terminal

Threaded brass inserts to accept 0.25” (6mm) bolt.

Terminal Hardware Torque

110 in.-lbs. (12.4 N-m).

End Point Volts/Cell

5

10

15

20

30

40

45

50

60

90

1.75

685

515

430

365

300

240

220

200

175

125

1.70

725

555

460

375

302

245

226

208

178

126

1.67

745

565

475

380

305

248

229

210

180

126

1.65

750

575

480

382

308

250

230

211

182

126

1.60

780

590

485

385

310

252

232

212

185

127

End Point Volts/Cell

.083

.25

.50

.75

1

2

3

5

8

10

12

20

24

72

100

1.90

207

152

109

89.8

70.4

42.2

30.8

20.2

13.4

11.0

9.36

5.88

4.96

1.76

1.28

1.85

220

155

126

102

79.3

46.8

33.9

22.1

14.6

11.9

10.2

6.39

5.40

1.92

1.40

1.80

310

185

142

113

84.9

49.3

35.3

23.0

15.2

12.4

10.6

6.63

5.60

1.99

1.45

1.75

350

215

150

119

88.3

50.5

36.3

23.4

15.9

12.7

10.7

6.72

5.68

2.01

1.47